Specifications
Bottom Hole Assembly – All Components |
Specification |
BHA dimensions, at full extension length |
3.750" OD x 18.6 ft / 5.7 m |
BHA weight |
211 lbs / 96 kg |
Casing Sizes, range |
4-1/2" to 9.625" OD |
Hole Types |
Open or Cased Hole |
Wellbore Direction |
Vertical, Deviated, or Horizontal |
Position in well |
Centralized |
Depth limitation |
None |
Deviation limitation |
None |
|
|
Productivity |
Specification |
Window width, max (at casing) |
1 in / 2.5 cm |
Window width, max (in rock) |
5.125 in / 130 mm |
Lateral excavation depth, max |
18 feet / 5.5 m |
Guaranteed Window Height for One (1) Run |
30 feet / 9.1 m |
Guaranteed to cut multiple casings to max OD |
30" conductor casing |
|
|
Operations |
Specification |
Working Pressure, typical (at surface) |
5000 psi |
Flow Rate, range |
4 – 7 bbls/min |
Typical Abrasive Use |
3800 lbs/hr (1.73 metric tonnes/hr) |
Sand Concentration, max |
5 lbs/gallon |
Suitable Abrasive |
20/40 non-API quartz or garnet sand |
Suitable Working Fluid |
Any water (fresh, salt, or brine), oil, acid, solvent, or surfactant. Not mud. |
Trip Speed, max |
100 ft/min |
Sub Crossover to Work String |
2-3/8" 8-Rnd Pin |
|
|
Main Chassis |
Specification |
Chassis Dimensions |
3.750" OD x 10.1 ft / 3 m x 95 mm |
Chassis Weight |
160 lbs / 72.5 kg |
Burst Pressure |
11,320 psi |
Spud Weight on Tool, max |
100 psi |
Operating Temperature, range |
-5°F to 365°F / -20°C to 185°C |
Wellbore deviation limitation, approx. |
45° / 100 ft |
|
|
Perforator Train |
Specification |
Number of Perforators, max |
3 |
Nozzles per perforator, typical |
2 |
Extension Length, max |
5.200 feet / 1.58 m |
Vertical Stroke Length |
19.7 in / 50 cm |
Stroke Speed, range |
2 – 28" / hr / 1 – 12 mm/min |
Slurry Velocity, typical (at nozzle) |
2200 mph / 3520 kmh |
|
|
Centrator |
Specification |
Dimensions |
3.750" OD x 16 in / 40.6 cm |
Weight |
26 lbs / 11.8 kg |
Accuracy, Azimuth / Inclination / Roll |
±0.5° / ±0.1° / ±0.5° |
Accuracy, Depth |
± 0.0001% (≤ 1 foot / 10000 feet depth) |
Self-adjustment accuracy |
5°, ±1° at zenith angle |
Operating Temperature, range |
-5°F (-20°C) to 250°F (125°C) |
Battery Power, typical |
40 hours |
HPHT Operating Temperature, max. |
350°F (175°C) for up to 10 hours |
|
|
DPDR |
Specification |
Passive Directional Control |
Yes |
Reporting Frequency |
Every 0.5 seconds or 120 calls/min |
Inputs |
Local coordinates at Set-up |
Outputs |
N/S, E/W. TVD & Measured Depth Azimuth, Inclination, Gyro- and Highside Tool Face Angles Temperature, Quality Factors Jet & Differential Pressures |
Exports |
Configurable Table Reports Plots to Printer or CSV Data Export |
Specifications Subject to Change due to Technical Advances